Huggers For Existing Screw-Down Ribbed Roofs

Product Description: Factory-notched Hugger sub-purlins to fit screw-down panels with various rib spacing and heights. Huggers can be manufactured with taller web to accommodate various depths of insulation. 10’ part lengths are typical.
Rib Spacings:
Standard 12”
Others 6” to 10”

Market Names:
7.2” Panel

  Performance Specifications
Construction Details
Design Manual
Installation Instructions
Testing and Product Approvals
Project Info Form

The most used product we manufacture is the Model “C”. This product is punched for the common “PBR” and “R” panels with rib spacing of 12” on center and is 1.83” tall. It is a stocked inventory part and will fit most, but not all, 12” on center ribbed panels. It will not fit the old Pascoe Buildings PP-4 panels or other panels with ribs greater than 4” wide at the base and/or rib heights greater than 1½” tall. The Model “C” will install over Butler Rib I & II, Mitchell/CECO MAP, Varco Pruden, American, Behlen, Chief, Delta, Gulf States and most other common 12” o.c. ribbed panels.

For other ribbed panels, Roof Hugger can custom manufacture a factory notched sub-purlin that will fit your specific job application. All we need is the above Project Info Form filled out with the specific dimensions.


Copyright 2019, Roof Hugger, LLC, All Rights Reserved.
A Member of LSI Group, Inc.
Physical Address: 142 Whitaker Rd. Lutz, FL 33549
Mailing Address: P.O. Box 1027 Odessa, FL 33556
Toll Free: 800-771-1711     Direct: 813-909-4424

Web Design by Bug-Eyes Web